ENVIRONMENTAL ENGINEER

Summary

This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will conduct pollution control surveys throughout the Shipyard to investigate compliance with applicable standards.
You will represent the Portsmouth Naval Shipyard during negotiations with regulatory agencies and public hearings associated with environmental permit/licensing processes.
You will advise management on new environmental regulations having an impact on operations.
You will complete permit applications and submit changes as necessary for management review.

Requirements

Qualifications
SPECIALIZED EXPERIENCE: In addition to the basic requirements, in order to qualify for this position, your resume must demonstrate at least one year of specialized experience at or equivalent to the next lower grade level or pay band in the federal service or equivalent experience in the private or public sector. Specialized experience is defined as experience that is typically in or related to the work of the position to be filled and has equipped you with the particular competencies/knowledge, skills, and abilities, to perform successfully the duties of the position and is typically in or related to the work of the position. Specialized experience must demonstrate the following: FOR GS-11 (one year of specialized experience equivalent to GS-09): Experience with federal, state, local, and Navy environmental laws and regulations to establish the need for, develop, and update environmental programs to ensure that Shipyard operations are conducted in compliance with all regulations. Experience identifying and resolving critical problems encountered in the development and implementation of the Shipyard Environmental Protection Program. Experience assisting with conducting comprehensive engineering studies to determine the most feasible corrective measures and recommending appropriate action for various environmental deficiencies. FOR GS-12 (one year of specialized experience equivalent to GS-11): Experience managing environmental programs that meet all applicable Federal, State, and local environmental laws and regulations, including: the Clean Air Act (CAA), the Clean Water Act (CWA), Emergency Response, Environmental Audits, Environmental Training, Hazardous Waste, Sample Management, Environmental Management Systems (EMS) and Tank Management. Experience conducting comprehensive engineering studies to determine the most feasible corrective measures and recommending appropriate action for various environmental deficiencies. Experience reviewing construction projects for environmental impact and/or environmental requirements. Experience conducting formal and informal training for Shipyard personnel for environmental awareness. SUBSTITUTION OF EDUCATION FOR EXPERIENCE: Applicants may substitute the following directly-related education for the required experience, provided it demonstrates the knowledge, skills and abilities necessary to do the work of the position: GS-11: 3 years of progressively higher-level graduate education leading to a Ph.D. degree, or Ph.D. or equivalent doctoral degree, directly related to the position. COMBINATION OF EDUCATION AND EXPERIENCE: Equivalent combinations of directly-related education and experience may be combined to meet the total qualification requirements for GS-11. GS-12: There is no substitution of education for experience at the GS-12 grade level. Are you using your education to qualify? Positions that have basic education requirements, or if you are using education to meet all or part of the qualification requirements, you must submit a copy of your transcripts for all degrees, or an itemized list of college courses which includes equivalent information from the transcript (course title, semester/quarter hours, and grade/degree earned). See OPM's General Policies for information on crediting education. Education completed in foreign colleges or universities may be used to meet the qualification requirements if the applicant can provide documentation indicating that the foreign education is comparable to that received in an accredited educational institution in the United States. It is the responsibility of the applicant to provide such evidence when applying. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/ Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education
BASIC REQUIREMENTS: All applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual in A. or B. below in order to qualify for this position: A. Successful completion of a Bachelor's degree or higher in Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above). 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) POSITIVE EDUCATION REQUIREMENTS: This position has a Positive Education Requirement. In order to verify that you meet the positive education qualifications for this position, you must submit a complete copy of your transcripts (unofficial transcripts are acceptable) or an itemized list of college courses which includes equivalent information from the transcript (course title, semester/quarter hours and grade). Failure to provide this information will result in an ineligible rating. Education completed in foreign colleges or universities may be used to meet the qualification requirements if the applicant can provide documentation indicating that the foreign education is comparable to that received in an accredited educational institution in the United States. It is the responsibility of the applicant to provide such evidence when applying. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Required Documents

A complete resume is required. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. Your resume must show relevant experience, job title, duties and accomplishments. Your resume must show complete information for each job entry to support minimum qualifications. The following information should be provided in your resume: employer's name, starting and end dates (Mo/Yr), hours per week if experience was less than full time (35-40 hours per week), and pay plan, series and grade level (e.g. GS-0201-09) for relevant federal experience. TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume. Are you claiming membership in any professional organizations, or possession of a license, certificate or credentials? Check the Conditions of Employment section above to see if any are required. If you claim membership, license, certification, or credentials, you must submit a copy of said document in your application package. Are you using education as a substitute for some or all of the experience requirement? Is there a basic education requirement for this position? Check the Education section above to see what is allowed and what is required. Any claims you make in your resume or assessment questionnaire regarding education or degrees MUST be supported by submitting with your application official or unofficial transcripts or a list of courses, grades earned, completion dates, and quarter and semester hours earned issued from your school. While unofficial transcripts are acceptable for initial application, an official transcript will ultimately be required if you are selected for the position. You may submit a copy your degree(s) if specific coursework does not have to be verified. Are you a veteran claiming 5-point veterans' preference or claiming sole survivorship preference? You must submit a copy of your latest DD-214 Certificate of Release or Discharge from Active Duty (any copy that shows all dates of service, as well as character of service [Honorable, General, etc.] is acceptable) OR a VA letter that shows dates of service or service connected disability AND character of service. If you have more than one DD-214 for multiple periods of active duty service, submit a copy for each period of service. If you were issued a DD-215 to amend aforementioned information on the DD-214 you must submit that too. If you are not sure of your preference eligibility, visit the Department of Labor's website: Veterans' Preference Advisor Are you a disabled veteran or claiming 10-point veterans' preference? If you are eligible to claim 10 point veterans preference you must submit a DD-214 Certificate of Release or Discharge from Active Duty as described above for 5-point preference. You must also provide the applicable supporting documentation of your disability (e.g. disability letter from the VA) as described on Standard Form-15 (SF-15). http://www.opm.gov/forms/pdf_fill/SF15.pdf. Are you an active duty service member? Active Duty Service Members are required to submit a statement of service printed on command letterhead and signed by the command. The statement of service must provide the branch of service, rate/rank, all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.). Application documents, including supplemental ones, may be shared outside the Human Resources Office. Supplemental documents may contain your SSN, DOB, or personal information of others (e.g., on military orders, marriage certificates). You may redact this information before submitting; however, if selected, you must provide unredacted originals.