ENGINEER

Summary

This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will serve as an Electronics Engineer for the Naval Surface Warfare Center Panama City Division.
You will apply engineering principles to design, analyze, test, and verify analog or digital electronic devices and systems.
You will prepare documentation covering product requirements, system specifications, and maintenance procedures.
You will test and inspect the reliability and safety of electronic devices and systems, analyze data, and evaluate equipment performance under varying conditions.
You will evaluate system performance and recommend design modifications or equipment repair to improve performance and meet cost objectives.
You will integrate new or experimental electronic equipment into existing systems.
You will provide advice and technical expertise for the maintenance, troubleshooting, and repair of complex electronic systems.

Requirements

Qualifications
TO QUALIFY FOR ND-4: Your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-3 pay band (GS-9 through GS-11 equivalency) in the Federal service or equivalent experience in the private or public sector as a professional engineer performing engineering work involving electronic circuits, circuit elements, equipment, systems, and/or associated phenomena. TO QUALIFY FOR ND-3: Your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-2 pay band (GS-5 through GS-8 equivalency) in the Federal service or equivalent experience in the private or public sector as a professional engineer assisting in engineering work involving electronic circuits, circuit elements, equipment, systems, and/or associated phenomena. TO QUALIFY FOR ND-2: You must have successfully completed a full 4-year course of study in an accredited college or university leading to a bachelor's or higher degree that included a major field of study as described in the Education section of this flyer. Additional qualification information can be found from the following Office of Personnel Management website: all-professional-engineering-positions-0800.pdf (opm.gov) Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education
Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. TO QUALIFY FOR ND-3: Education may be substituted for specialized experience as follows: A master's or equivalent graduate degree; OR Two full years of progressively higher level graduate education leading to a master's or equivalent graduate degree; OR A combination of experience and graduate education as described above that equates to one year of experience.

Required Documents

A complete resume is required. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. Your resume must show relevant experience, job title, duties and accomplishments. Your resume must show complete information for each job entry to support minimum qualifications. The following information should be provided in your resume: employer's name, starting and end dates (Mo/Yr), hours per week if experience was less than full time (35-40 hours per week), and pay plan, series and grade level (e.g. GS-0201-09) for relevant federal experience. TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume. Are you claiming membership in any professional organizations, or possession of a license, certificate or credentials? Check the Conditions of Employment section above to see if any are required. If you claim membership, license, certification, or credentials, you must submit a copy of said document in your application package. Are you using education as a substitute for some or all of the experience requirement? Is there a basic education requirement for this position? Check the Education section above to see what is allowed and what is required. Any claims you make in your resume or assessment questionnaire regarding education or degrees MUST be supported by submitting with your application official or unofficial transcripts or a list of courses, grades earned, completion dates, and quarter and semester hours earned issued from your school. While unofficial transcripts are acceptable for initial application, an official transcript will ultimately be required if you are selected for the position. You may submit a copy your degree(s) if specific coursework does not have to be verified. Are you a veteran claiming 5-point veterans' preference or claiming sole survivorship preference? You must submit a copy of your latest DD-214 Certificate of Release or Discharge from Active Duty (any copy that shows all dates of service, as well as character of service [Honorable, General, etc.] is acceptable) OR a VA letter that shows dates of service or service connected disability AND character of service. If you have more than one DD-214 for multiple periods of active duty service, submit a copy for each period of service. If you were issued a DD-215 to amend aforementioned information on the DD-214 you must submit that too. If you are not sure of your preference eligibility, visit the Department of Labor's website: Veterans' Preference Advisor Are you a disabled veteran or claiming 10-point veterans' preference? If you are eligible to claim 10 point veterans preference you must submit a DD-214 Certificate of Release or Discharge from Active Duty as described above for 5-point preference. You must also provide the applicable supporting documentation of your disability (e.g. disability letter from the VA) as described on Standard Form-15 (SF-15). http://www.opm.gov/forms/pdf_fill/SF15.pdf. Are you an active duty service member? Active Duty Service Members are required to submit a statement of service printed on command letterhead and signed by the command. The statement of service must provide the branch of service, rate/rank, all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.). Application documents, including supplemental ones, may be shared outside the Human Resources Office. Supplemental documents may contain your SSN, DOB, or personal information of others (e.g., on military orders, marriage certificates). You may redact this information before submitting; however, if selected, you must provide unredacted originals.